* TOOGOO is a signed up trademark. ONLY Authorized seller of TOOGOO can easily market under TOOGOO listings.Our items will enhance your knowledge to unmatched ideas.
TOOGOO(R) PDB XT60 Power Distribution Board BEC 5V 2A 12V 0.5 A with XT60 Plug for DIY Quadcopter Output Support 6 ESC for X or H Design FPV Racing Quad drone
Color as shown
Panel size: 5.2 cm * 3.6 cm * 0.3 cm
Panel weight: 7.5 g (features 11g)
2oz copper, 4-layers & 1.6 mm PCB
Built-in XT60 Socket
Lighting as well as long lasting for intense usage
Quick & Easy Installation
Overall 6 sets ESC solder buttons are actually suitabled for H or X kind frame
5V & 12V Output LED indicators & Short circuit tolerant
Input voltage array (3S-4S LiPo operation): 9-18V DC
Moderated outcomes: 5V as well as 12V outcomes
Continuous existing: 25A * 4 or 15A * 6
Peak existing (10 seconds/minute): 30A * 4 or 20A * 6
BEC 5V outcome:
Designed for: RC Receivers, Flight operators, OSD, as well as Servos
BEC Mode: Linear
Voltage: 5.0 +/- 0.1 VDC
Constant stream: 2 Amps (Max.2.5 A 10s/minute)
Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
Short-circuit tolerant: 5 seconds/minute
BEC 12V outcome:
Designed for: Video TX or FPV video camera with linear regulator
BEC Mode: Linear
Advised battery: 4S LiPo (thirteen ~ 18V DC)
Voltage: 12.0 +/- 0.3 VDC
Constant stream: 500mA (Max.0.8 A 5s/minute)
Short-circuit tolerant: 2 seconds/minute
Plan Contents:1 * PDB Board
1 * XT60 Connector
Just the above bundle information, various other items are actually certainly not included.Note: Light shooting as well as different displays may result in the colour of the thing in the picture a little bit of different from the real point. The measurement permitted inaccuracy is +/- 1-3cm.
1.The PDB-XT60 has been engineered to provide the highest performance and reliability in a 36*52mm & 4 layers PCB.
2.It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc.
3.The PDB-XT60 offers a Authentic Amass XT60 plug to connect the LiPo pack conveniently.
4.4-layer PCB Board, high current power and BEC stratification, avoid ground disturbance BEC power current;
5.This board makes the wiring nice, with the bonus of having the XT60 option. Stacked right on top of the CC3D with plenty of room.