allaboutdronescomlogo
Have you seen our United States website? Visit USA today!
We also have websites for: Visit USA Visit USA Visit USA Visit USA Visit USA

Matek Power Distribution Board, PDB with XT60 BEC 5V&12V 6 ESC Output Design FPV Racing RC Drone Quadcopter

Price: £5.99
Product prices and availability are accurate as of 2019-05-22 14:20:50 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.co.uk/ at the time of purchase will apply to the purchase of this product.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Product Description

With so many drones & accessories discounted these days, it is wise to have a name you can trust to be reliable. The Matek Power Distribution Board, PDB with XT60 BEC 5V&12V 6 ESC Output Design FPV Racing RC Drone Quadcopter is certainly that and will be a great acquisition.

For this great price, the Matek Power Distribution Board, PDB with XT60 BEC 5V&12V 6 ESC Output Design FPV Racing RC Drone Quadcopter comes highly respected and is always a regular choice with most people who visit our site. Tmalltide have provided some great touches and this equals good value for money.

Manufacturer Description

Description:
General:
-Input voltage range (3S-4S LiPo operation): 9 - 18V DC
-Regulated 5V and 12V outputs
-LED power indicators ( 5V & 12V outputs )
-6 ESC outputs & 1 pair VCC/GND pads
ESC outputs:
-Continuous current: 25A*4 or 15A*6
-Peak current (10 seconds/minute): 30A*4 or 20A*6
BEC 5V output:
- Designed for RC receivers, Flight Controllers, OSD, and Servos.
- DC/DC synchronous buck regulator
- Voltage: 5.0 +/- 0.1VDC
- Continuous current: 2Amps (Max. 2.5A 10s/minute)
- Output Ripple: 40mV(VIn=16V, Vout=5V@2A load)
- Short-circuit tolerant ( 5 seconds/minute)
BEC 12V output:
- Designed for with linear regulator
- The battery should be 4S Lipo ( 13-18V DC )
- Voltage: 12.0 +/- 0.3VDC
- Continuous current: 500mA(Max 0.8A 5S/minute)
- Short-circuit tolerant ( 2 seconds/minute?
BEC 12V @ 3S LiPo
-Output voltage= 3S LiPo voltage -1V
Features:
2oz copper, 4-layers &1.6mm PCB.
Built-in XT60 Socket
Total 6 pairs ESC solder tabs are fit for H or X type frame 5V & 12V Output LED
indicators & Short circuit tolerant
Physical:
-Dimensions: 36 x 50 x 4 mm (without XT60)
-Mounting: 30.5 x 30.5mm, ? 3mm
-Weight: 7.5g (w/o XT60), 11g (w/ XT60)
------------------------------------------------------------------------------
Package Including
1 * Matek XT60 PDB
1 * XT60

Product Features

The PDB-XT60 has been engineered to provide the highest performance and reliability in a 36*50mm & 4 layers PCB. BEC 5V 12V Output ------ providing synchronized & regulated DC 5V outputs & linear regulated DC 12V for powering camera, servos , RC Receiver , Flight Controller , Video Transmitter , LED , etc Total 6 pairs ESC solder tabs, fit for H or X type frame. Compatible with a plate rack Which width less than 48mm. Mounting hole Suit for CC3D naze32 SP Racing F3 FC. Features for XT60 PDB Power Distribution Board ------ 2oz copper, 4-layers & 1.6mm PCB. Built-in XT60 Socket. Total 6 pairs ESC solcer tabs are fit for H or X type frame. 5V & 12V Output LED imdicator & Short circuit tolerant. This board makes the wiring nice, with the bonus of having the XT60 option. Stacked right on top of the CC3D with plenty of room.

Write a Review

Fresh Store Builder - The Most Advanced Amazon Affiliate Software