allaboutdronescomlogo
Have you seen our United States website? Visit USA today!
We also have websites for: Visit USA Visit USA Visit USA Visit USA Visit USA

LaDicha Matek Systems PDB-XT60 W/BEC 5V & 12V 2oz Copper for RC Drone FPV Racing Multi Rotor

Price: £8.37
Product prices and availability are accurate as of 2019-05-22 23:54:08 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.co.uk/ at the time of purchase will apply to the purchase of this product.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Product Description

With so many products discounted on our site discounted right now, it is wise to have a make you can trust. The LaDicha Matek Systems PDB-XT60 W/BEC 5V & 12V 2oz Copper for RC Drone FPV Racing Multi Rotor is certainly that and will be a great birthday present.

For this reduced price, the LaDicha Matek Systems PDB-XT60 W/BEC 5V & 12V 2oz Copper for RC Drone FPV Racing Multi Rotor comes widely recommended and is always a regular choice with most people who visit our site. LaDicha have added some design touches and this results in great value.

Manufacturer Description


Matek Systems PDB-XT60 W/ BEC 5V & 12V 2oz Copper For RC Multirotors
The PDB-XT60 has been actually crafted to offer the greatest possible efficiency and integrity in a 36 * 50mm & 4 coatings PCB. It disperses power from a LiPo pack to 6 ESCs, along with providing synchronised & controlled DC 5V outcomes & direct controlled DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, and so on
. It delivers a XT60 socket to connect the LiPo pack comfortably.
Explanation:
General:
-Input voltage variation (3S-4S LiPo function): 9 - 18V DC
-Regulated 5V and 12V outcomes
-LED power signs (5V & 12V outcomes )
-6 ESC outcomes & 1 set VCC/GND pads
ESC outcomes:
-Continuous existing: 25A * 4 or 15A * 6
-Peak existing (10 seconds/minute): 30A * 4 or 20A * 6
BEC 5V output:
-Designed for RC Receivers, Flight operators, OSD, and Servos.
-DC/DC simultaneous dollar regulator.
-Voltage: 5.0 +/- 0.1 VDC
-Continuous existing: 2 Amps (Max.2.5 A 10s/minute)
-Output Ripple: 40mV (VIn=16V, VOut=5V@2A lots)
-Short-circuit forgiving (5 seconds/minute)
BEC 12V output:
-Designed for Video TX or FPV video camera along with direct regulator.
-The battery needs to be actually FOUR LiPo (thirteen ~ 18V DC)
- Voltage: 12.0 +/- 0.3 VDC
-Continuous existing: 500mA (Max.0.8 A 5s/minute)
-Short-circuit forgiving (2 seconds/minute)
BEC 12V @ FOUR LiPo
-Output voltage= FOUR LiPo voltage -1 V
Bodily:
-Dimensions: 36 x 50 x 4 mm (without XT60)
-Mounting: 30.5 x 30.5 mm, F3mm
- Weight: 7.5 g(w/o XT60), 11g(w/ XT60)
Features:
2oz copper, 4-layers & 1.6 mm PCB.
Built-in XT60 Socket
Total 6 pairs ESC solder tabs are actually suitabled for H or X type frame 5V & 12V Output LED signs & Short circuit forgiving
Package deal included:
1 x Matek Systems PDB-XT60

Product Features

The PDB-XT60 has been engineered to provide the highest possible performance and reliability in a 36*50mm & 4 layers PCB. It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised & It offers a XT60 socket to connect the LiPo pack conveniently. -Input voltage range (3S-4S LiPo operation): 9 - 18V DC -Regulated 5V and 12V outputs -LED power indicators ( 5V & 12V outputs )

Write a Review

Fresh Store Builder - The Most Advanced Amazon Affiliate Software