Main Controller: 32-bit MCU
Sensing Unit: High-precision 3-axis gyroscope and 3-axis accelerometer
Gyroscope Scale Range: ± 2000 dps
Accelerometer Scale Range: ± 4g
PWM Output: 920uS ~ 2120uS with 1520uS center size/ fifty ~ 333Hz
Input Voltage: 4.8 V ~ 8.4 V
Operating Temperature: -10 ? ~ fifty ?
Size: 43 × 27 × 14mm
Weight: 10g (leaving out cords)
External LED Module
An outside LED component is actually included in make the gyro also much easier and easier to put up and make use of.
Coach Mode is actually incorporated. When soaring within this setting, you may just tilt the airplane to a particular slant by providing aileron or lift stick input. Roll and loophole are certainly not allowed this setting, the airplane will certainly be stabilized constantly. This prevents the airplane from being tilted right into a bigger slant that might cause a danger. This setting may be utilized as emergency situation saving, or in various other requests, e.g. to possess a training for new beginners or to make use of for FPV
6-position Mode Switching
This new component allows you to shift the flight setting among all modes sustained throughout flight, by utilizing a combining of a 2-position and 3-position toggle activate your transmitter
Scheduling Examples for 6-position Switch Mixing
Pass-through functionality is actually on call for [A2] and [E2] channels. When the second aileron or lift channel is actually unused, the input sign put on [A2] or [E2] will straight be exchanged the outcome [OUT4] or [OUT5] Through this component, the [A2] and [E2] may be utilized as every other reason as you need, e.g. throttle, equipment or cover, etc
32-bit MCU, high-precision 6-axis MEMS sensor, improved hardware platform and new firmware solution provide more reliable performance.
6 flight modes, including Gyro-Off mode, Normal mode, Trainer mode, Atti-Lock mode, Auto-Level mode and Auto-Hover mode.
Compatible with most standard receivers, standard PPM single-line receivers and Futaba's S.Bus and S.Bus 2 receivers.
External LED module, integrated with data interface, flat or upright various mounting orientations supported.
Customizable hardware and software low pass filters for gyroscope and accelerometer, enable you to optimize the performance of the gyro as you wish.